Sony MDX-C8500X - Manual (Page 30)

30
TV/Video
You can connect an optional TV tuner and TV
monitor to this unit.
Watching the TV
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press either side of (DISC/PRST)
repeatedly to select the desired TV band.
Watching a video
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press (MODE) repeatedly to select “Video
1.”
Playback the video.
Note
“Video 2” appears if the VIDEO 2 terminal of the
TV monitor is selected.
Memorizing TV channels
automatically
The unit selects the TV channels with the
strongest signals and memorizes them in the
order of their frequency.
Caution
When tuning in a station while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press (MENU), then press either side of
(DISC/PRST) until “Auto Mem” appears.
3
Press (ENTER).
The unit stores TV channels in the order of
their frequencies on the number buttons.
A beep sounds when the setting is stored.
Notes
• The unit does not store TV channels with weak
signals. If only a few TV channels can be
received, some number buttons will remain
empty.
• When a preset number is indicated in the display,
the unit starts storing TV channels from the one
currently displayed.
Memorizing only the
desired TV channels
You can store up to 6 channels on the number
buttons in the order of your choice.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press either side of (SEEK/AMS) to tune
in the TV channel you want to store on
each number button.
3
Press and hold the desired number
button ((1) to (6)) until you hear a beep
sound.
The number button indication appears in
the display.
Note
If you try to store another channel on the same
number button, the previously stored channel will
be erased.