Setup instructions, Using a parallel cable, Appendix a – Sony 970C Series User Manual
Using a Parallel Cable
Attach Automatic Two-Sided Printing Module.
Turn knob on printer’s Rear Access Door
counter-clockwise and remove door.
Press button on each side of
Automatic Two-Sided Printing Module,
then insert module into back of printer.
Connect Parallel Cable
If you want to connect your 970C
Series printer to a network, refer to
the HP DeskJet 970C Series Printer
Network Guide for Windows for
Plug in Electrical Power Cord.
970C.book Page 51 Tuesday, February 1, 2000 11:31 PM