Sony CDX-C910 - Manual (Page 10)

10
Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
EN
Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item
changes as follows:
Station name*˜ Clock
* If the station name is not stored, “NO Name”
appears in the display for one second.
Erasing the station name
1
Tune in any station and press (LIST) for
two seconds.
2
Press (DSPL) for two seconds.
“Delete” and the station name appear in the
display.
3
Rotate the dial to select the name that
you want to erase.
4
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press (LIST) for two seconds.
The unit returns to the normal radio
reception mode.
Locating a station by
frequency and name
— List-up
You can search for the memorised stations
names in the display.
1
Press (LIST) momentarily.
The name assigned to the station currently
playing appears in the display.
2
Press (LIST) repeatedly until you find the
desired station.
3
Press (5) (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode. To
go to the normal mode, press (DSPL).
FM1 WRKISS
87.9 SUR EQ
LST 1 WRKISS
2 WRPOWER SUR EQ
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional equipment with
the rotary remote.
By pressing the button
(the SOURCE button)
Every time you press (SOURCE), the
source changes as follows:
FM1 n FM2 n AM n CD1 n CD2 n MD1 n
MD2
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
(SOURCE)