Sony CDX-C910 - Manual (Page 17)

17
Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
EN
CD/MD Changer
Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the item changes as follows:
Disc name ˜ Clock
Erasing the disc memo
1
Press (SOURCE) to select the CD changer
(for example CD2 or CD3).
2
Press (LIST) for two seconds.
3
Press (DSPL) for two seconds.
“Delete” and the disc memo appear in the
display.
4
Rotate the dial to select the name that
you want to erase.
5
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
CD1 SCHUBERT
4 2 3.59 SUR EQ
DISC TRACK
DISC NAME
Locating a disc by name
— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD” (page 16).
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• To turn off the display, press (DSPL). Once a disc name
has been displayed for five seconds, the display goes back
to its normal playback mode.
• The track names are not displayed during MD playback.
• If there are no discs in the magazine, “NO Disc” appears
in the display.
• If a disc has not been assigned a custom file, “********”
appears in the display.
• If the disc information has not been read by the unit, “?”
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
• The information is appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
LST 4 SCHUBERT
5 BACH SUR EQ