Sony CDX-C910 - Manual (Page 6)

6
Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
EN
SEEK/AMS
To search forward
To search backward
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
Note
If “
” or “ ” appears in the display,
that means you have reached the beginning or the end of
the disc and you cannot go any further.
Playing a CD in various
modes
You can play CDs in various modes:
• Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
• Repeat (Repeat Play) repeats the current
track.
• Shuf (Shuffle Play) plays all the tracks in
random order.
1
Press (SHIFT).
Every time you press (SHIFT), only the
items you can select light up.
2
Press (3) (P.MODE) repeatedly until the
desired play mode appears.
Each time you press (3) (P.MODE), the
item changes as follows:
Intro n Repeat n Shuf n PGM
3
Press (4) (n) to select “on.”
Playback starts.
4
Press (SHIFT).
To go back to the normal playback mode,
select “off” in step 3 above.
SET UP P.MODE
1 2 3 4 5
SHIFT
CD
Intro off SUR EQ
CD
Intro on SUR EQ
INTRO
Creating a programme
— CD Programme Memory
You can play the tracks in the order you want
by making your own programme. You can
make two programmes: Programme 1 and
Programme 2. You can select up to 12 tracks in
each programme. You can store the
programmes in memory.
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
“P 1” shows Programme 1 is selected.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press either side of (SEEK/AMS) to select
the track you want.
3
Press (5) (ENTER) momentarily.
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish selecting tracks, press
(3) (P.MODE) for two seconds.
6
Press (SHIFT).
Notes
• “*Wait*” appears in the display while the unit is reading
the data.
• “*Mem full*” appears in the display when you try to
enter more than 12 tracks into a programme at one time.
CD PGM edit
12 P1.‚3 SUR EQ
TRACK
CD PGM edit
2 P1.‚2 SUR EQ
TRACK
µ
P1 PGM edit
+Enter+ SUR EQ