Sony LBT-ZUX9 - Manual (Page 23)

23 US
Disc
Other operations
Tips
• The program you made remains in the
system’s memory even after it has been
played back. Press NX
(or N on the
remote) to play back the same program again.
• If “--.--” appears instead of the total playing
time during programming, this means:
– you have programmed a track in an AUDIO
CD with track number exceeds 20.
– the total playing time has exceeded 100
minutes.
– you have programmed an MP3 audio track.
— Repeat Play
You can play back all the tracks or a
single track on a disc repeatedly.
Press REPEAT on the remote
repeatedly during playback until
“
REP ” or “ REP 1 ” lights up in the
display.
• REP: All the tracks on the disc(s), or all
the tracks in the folder* are played back
repeatedly up to five times.
• REP 1: A single track is played back
repeatedly until “REP 1” is canceled.
* When “ ” or “ SHUF” is selected for
MP3 audio tracks.
To cancel Repeat Play
Press REPEAT on the remote repeatedly
until both “REP” and “REP 1” light off
from the display.
Note
You cannot select “REP” and “ALL DISCS
SHUF” at the same time.
To Do this
Cancel Program
Play When playback is
stopped, press PLAY
MODE on the remote
repeatedly until
“PROGRAM” lights off
from the display.
Delete the last step
from the program
list Press CLEAR on the
remote when playback is
stopped.
Playing repeatedly