Using the drum pads – Sony LBT-ZUX9 User Manual

Page 40

Advertising
background image

40

US

5

By following the tempo of the
music, press MAX PAD or JUMP
PAD 4 times to input the tempo.

Each time you press MAX PAD (or
JUMP PAD), the flashing box will be
replaced with an “M” (or “J”).
The “MAX” and “JUMP” effect would
be activated following the tempo of the
music. These effects are activated
following the input sequence
repeatedly.

Creating the “MAX” and “JUMP”
effect manually

1

Press X-ROUND ON/OFF
repeatedly until “X-ROUND”
lights up in the display.

The last selected X-ROUND mode
appears in the display.

2

Press X-ROUND MODE
repeatedly to select the
X-ROUND mode you want.

3

Press MAX/JUMP MODE
repeatedly until “MANUAL”
appears in the display.

4

Press MAX PAD or JUMP PAD to
activate the “MAX” or “JUMP”
effect anytime you like.

Notes

• You cannot activate “MAX” or “JUMP”

effect when RANDOM, RANDOM
POSITION or TWISTER is selected.

• When you press any buttons other than

MAX PAD and JUMP PAD during tempo
input, the MAX/JUMP MODE would
automatically changed to “MANUAL” during
“TEMPO” mode.

• If “Hit Faster” appears in the display, the input

tempo is below the lower limit of the tempo.
Hit again in faster tempo.

• If “Hit Slower” appears in the display, the

input tempo is beyond the upper limit of the
tempo. Hit again in slower tempo.

— BEAT BLEND

With the drum pads, you can add
percussion during playback. This effect
can be used with any source.

To add the drum sound

Tap PAD A or PAD B to produce the
respective sound.

To change the drum sound

Hold down PAD A or PAD B and turn
OPERATION DIAL to select the sound
you want. You can select from a variety of
different drum sounds.
The name of the drum sound appears in
the display.
The sound you select will be stored in
PAD A or PAD B.

To create a drum roll

1

Hold down PAD A and PAD B at the
same time.

“CHAIN” appears in the display.

2

Turn OPERATION DIAL clockwise
to output the PAD B sound and
counterclockwise to output the
PAD A sound.

To adjust the volume of the drum

Press BEAT LEVEL repeatedly.
The display changes cyclically as follow:
LEVEL 1

t LEVEL 2 t LEVEL 3 t

LEVEL MAX

t LEVEL 1...

Using the drum pads

Advertising