Sony LBT-ZUX9 - Manual (Page 59)

59 US
Ad
di
ti
on
al
I
n
fo
rmati
o
n
Specifications
AUDIO POWER SPECIFICATION
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6-ohm loads, both channels driven,
from 120 Hz – 10 kHz; rates 160 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 miliwatts to rated output.
Amplifier section
The following are measured at
AC 120 V, 60 Hz
Front/Surround speaker
RMS output power (reference):
250 W + 250 W (per channel at 6
Ω
,
1 kHz, 10% THD)
Inputs
VIDEO (AUDIO IN) L/R :
Voltage 250 mV, impedance
47 kilohms
AUDIO (AUDIO IN) L/R:
Voltage 450 mV, impedance
47 kilohms
MIC:
Sensitivity 1 mV, impedance
10 kilohms
(USB) port:
Type A
Outputs
PHONES:
accepts headphones of 8 ohms or more
Disc player section
System
Compact disc and digital audio system
Laser
Semiconductor laser
(
λ
= 770 – 810 nm)
Emission duration: continuous
Laser Output
Max. 44.6
µ
W*
* This output is the value measured at
a distance of 7 7/8 in (200 mm) from
the objective lens surface on the
Optical Pick-up Block with 9/32 in
(7 mm) aperture.
Frequency response
2 Hz – 20 kHz
Wave length
770 – 810 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Tape deck section
Recording system
4-track 2-channel stereo
Frequency response
50 – 13,000 Hz (±3 dB),
using Sony TYPE I tape
Wow and flutter
±0.35% W.Peak (IEC)
0.3% W.RMS (NAB)
±0.4% W.Peak (DIN)
Continued l