Sony LBT-ZUX9 - Manual (Page 48)

48 US
Note
The lighting effect may be different
depending on the connected lighting device
or the type of music being played back.
B
AUDIO OUT jacks
Use an audio cord to connect to the
audio input jacks of an optional
component (such as a VCR).
Notes
• There is no audio output from the
AUDIO OUT jacks when you select the
VIDEO or AUDIO function.
• If the effector mode is activated, the
effect will be output through the
AUDIO OUT jacks.
• If the beat pattern is turned on or drum
sound is activated, the beat sound would
be output through AUDIO OUT jacks.
C
AUDIO (AUDIO IN) L/R jacks
Use an audio cord to connect to the
audio output jacks of an optional
component (such as an
MD deck).
D
VIDEO (AUDIO IN) L/R jacks
Use an audio cord to connect to the
audio output jacks of an optional
component (such as a TV or VCR).
Listening to a connected TV or VCR
Press VIDEO (or press FUNCTION
repeatedly on the remote to select
“VIDEO”).
Listening to a connected MD deck
Press AUDIO (or press FUNCTION
repeatedly on the remote to select
“AUDIO”).
Note
If the sound is distorted or too loud when
you connect to the VIDEO (AUDIO IN)
L/R jacks, change to AUDIO (AUDIO
IN) L/R jacks and select AUDIO function.