Sony LBT-ZUX9 - Manual (Page 28)

28 US
Notes
• The following situations can increase the time
it takes to start playback:
– the folder structure is complex.
– the memory capacity is excessive.
• When the USB device is connected, the
system reads all the tracks on the USB device.
If there are many folders or tracks on the USB
device, it may take a long time to finish
reading the USB device.
• Do not connect the system and the USB
device through a USB hub.
• Depending on the previous operation you
have performed with the USB device, the
operation time for the USB device may vary.
• If the system is turned off or a power failure
occurs during “RESUME”, then you turn on
the system and start playback, the system will
start playback from the beginning of the track
where you stopped playback.
• This system does not necessarily support all
the functions provided in a connected USB
device.
• The playback order for the system may differ
from the playback order of the connected
digital music player.
• Be sure to turn off the system before removing
the USB device. Removing the USB device
while the system is turned on may corrupt the
data on the USB device.
• You are recommended not to save other types
of tracks or unnecessary folders on a USB
device that has MP3 audio tracks.
• A folder that does not include an MP3 audio
track is skipped.
• Tracks recorded by this system are played
back in the order of folder creation. Tracks
recorded by a device other than this system
such as a computer may not be played back in
the order in which they were recorded.
• The system can only play back MP3 audio
tracks with the extension “.MP3”.
• Attempting to play back non-MP3 format files
that have the extension “.MP3” may result in
noise or malfunction.
• The system can recognize up to
– 999 folders.
– 999 MP3 audio tracks.
The maximum number of MP3 audio tracks
and folders may vary depending on the MP3
audio track and folder structure.
• Compatibility with all MP3 encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play back at all.
• If you set the CD/USB power manage
function to “CD/USB POWER OFF”, you
cannot resume playback from the point you
stopped playback after you switch to TUNER
function.
To Do this
Search for a track
on an USB device
by its folder name
and track name and
start playback the
track. (TRACK
SEARCH) 1 Turn OPERATION
DIAL to select the
folder you want, then
press ENTER.
2 Turn OPERATION
DIAL to select the
track you want, then
press ENTER.
To return to the parent
folder, press RETURN.
Find a point in a
track Hold down m or M
on the remote during
playback, then release it
at the point you want.