Sony LBT-ZUX9 - Manual (Page 39)

39 US
So
un
d Ad
ju
st
men
t
To change the sound movement
Turn the X-ROUND JOG or press
X-ROUND +/–
on the X-TRANCE PRO
remote repeatedly to change the sound
movement from one speaker to another
speaker during
MANUAL WAVE ,
MANUAL FADER and MANUAL
BALANCE .
To change the speed of sound
movement
Turn the X-ROUND JOG or press
X-ROUND +/– on the
X-TRANCE PRO
remote repeatedly to change the speed of
the sound movement during AUTO
WAVE, AUTO FADER and AUTO
BALANCE.
To cancel the X-ROUND effect
Press X-ROUND ON/OFF repeatedly
until “X-ROUND OFF” appears in the
display. The “X-ROUND” lights off from
the display.
Notes
• If you cannot get the sound effect you want,
check the speaker connections.
• When the headphones are connected to the
PHONES jack, X-ROUND mode is
automatically changed to “X-ROUND OFF”
and you cannot change this setting.
• When you select “SPEAKERS A”, the
X-ROUND mode is automatically changed to
“X-ROUND OFF” and you cannot change
this setting.
— MAX/JUMP MODE
You can use “MAX” to enhance the sound
and “JUMP” to switch the sound position
to the opposite direction instantly.
Creating the “MAX” and “JUMP”
effect following the tempo of the
music
1
Press X-ROUND ON/OFF
repeatedly until “X-ROUND”
lights up in the display.
The last selected X-ROUND mode
appears in the display.
2
Press X-ROUND MODE
repeatedly to select the
X-ROUND mode you want.
3
Press MAX/JUMP MODE
repeatedly until “TEMPO”
appears in the display.
“Hit MAX/JUMP PAD” flashes on the
display.
4
Press MAX PAD or JUMP PAD
once to start the tempo input.
The following display appears in the
display.
RANDOM In the random basic
between AUTO WAVE,
AUTO FADER or
AUTO BALANCE and
to apply MAX or JUMP
effect randomly
Select To output sound
Creating “MAX” or “JUMP”
effect
Continued l