FARBERWARE COFFEEMAKER FSCM100 - Manual (Page 8)

7
DRIP STOP FEATURE
This FARBERWARE ® Coffeemaker has an Automatic Drip Stop
Feature. During the brewing cycle, the Carafe can be removed
to pour a cup of coffee from the Carafe. The Drip Stop Feature will
prevent the Coffeemaker from continuing to brew coffee for up to
one minute until the Carafe is returned to its proper position.
IMPORTANT: The Carafe must be replaced on the Warming Plate,
under the Filter Basket in less than a minute to prevent the
Filter Basket from overflowing.
AUTOMATIC START-UP FEATURE
This FARBERWARE ® Coffeemaker has an Automatic Start-Up
feature. This feature allows you to pre-program the Coffeemaker to
begin brewing coffee at a specific time. By leaving the
AUTO/OFF/ON Switch in the AUTO position, the Coffeemaker
will start-up automatically every day at the programmed start-up
time. You may override the Automatic Start-Up feature at any time
(without affecting the program) by sliding the AUTO/OFF/ON
Switch to ON. To restore the program, slide the AUTO/OFF/ON
Switch back to AUTO.
AUTOMATIC SHUT-OFF FEATURE
The Automatic Shut-Off feature automatically turns off the
Coffeemaker two hours after a programmed brew time. This
prevents the Coffeemaker from being left on for an extended period
of time, which is harmful to both the Coffeemaker and
the Carafe.
NOTE: The Automatic Shut-Off feature will only work when the
Coffeemaker is in the AUTO position and a pre-programmed
start-up time has been scheduled.