FARBERWARE COFFEEMAKER FSCM100 - Manual (Page 9)

8
BREWING COFFEE IN YOUR
FARBERWARE ® 10 CUP
PROGRAMMABLE COFFEEMAKER
CAUTION: Use this product with proper AC voltage rating only.
Be sure to unplug the power cord when Coffeemaker is not in
use for extended periods of time.
1. Lift the Carafe Lid. Fill the Carafe with
cold water to the level for the desired
number of cups (1-10). Open the Water
Reservoir Lid, and pour the water from
the Carafe into the Water Reservoir.
Close the Water Reservoir Lid.
2. Swing out the Coffee Filter Basket
and place a #4 paper coffee filter
(or a permanent gold filter) inside
the Removable Filter Basket.
3. Put coffee grounds in the filter, using
one level tablespoon of drip grind
coffee for each cup of brewed coffee.
(See Figure 1.)
4. Make sure the Removable Filter Basket is
pushed all the way into the Swing-Out
Filter Basket. Make sure the Swing-Out
Filter Basket fits securely back into the unit.
IMPORTANT: When using the Timer feature,
and at all times before brewing, remember
to place Carafe on the Warming Plate.
5. Place the Carafe on the Warming Plate,
making sure the Carafe Lid is on the Carafe.
6. Make sure the AUTO/OFF/ON Switch is in
the OFF position. Plug the appliance into a
standard 120V AC electrical outlet.
7. The LCD will flash “12:00” until you set the
time. (See Figure 2.)
FIGURE 1
*
AUTO OFF ON
ON HOUR
MIN.
BREW
*
*
FIGURE 2