Dimensions and weights for mounting – Schneider Electric ALTIVAR 58 TRX User Manual
Page 164
Class 8839 58M Enclosed AC Drives
Dimensions and Weights for Mounting
164
09/2003
©
2000–2003 Schneider Electric All Rights Reserved
Class 8839 58M Enclosed Drives: 25–75 hp CT Controllers and 30–100 hp VT Controllers @ 460
V and 15–40 hp CT Controllers and 15–50 hp VT Controllers @ 208/230 V
A
B
Ш1.50
(38.1)
Ш0.625
(15.875)
Lifting Holes
20.38
(517.7)
5.90
(149.9)
1.00
(25.4)
D
E
F
G
H
C
Conduit Entry - Top View
Conduit Entry - Bottom View
16.00
(406.4)
14.00
(355.6)
3.00
(76.2)
NOTE: Remove plenum fan filter, front grill,
and retaining bracket assembly to access
the mounting hole locations.
NOTE: Provide at least 36 in. of mounting
clearance in front of the drive controller and
at least 24 in. of mounting clearance at the
top of the drive controller. Floor-mounted
units may be mounted side by side without
clearance.
NOTE: Remove the top or bottom conduit
plates as necessary to facilitate the
appropriate conduit entry. Ensure that the
plates are replaced before working on the
drive controller.
hp
Weight
Enclosure Dimensions
E
n
c
los
ure
S
iz
e
460 V
208/230 V
A
B
C
D
E
F
G
H
CT
VT
CT
VT
lb
kg
in.
mm
in.
mm
in. mm
in.
mm
in.
mm
in.
mm
in. mm
in. mm
25–40 30–50
15–20 15–25 378
171
83.38
2117.9 93.87 2384.3
84
2133.6
16.75
425.5
14.50 368.3
20
508
8.0
203.2 18
457.2 E
50–75 60–100 25–40 30–50 562
254
83.38
2117.9 93.87 2384.3
84
2133.6
23
584
19.00 482.6
25
635
8.0
203.2 23
584.2 F
S
ize
E
-F
di
m
e
n
s
io
n
s
.e
ps