Sony FAX-B140 - Manual (Page 19)

1-11
1
SETTING UP
6 With the label facing outwards, insert the BJ cartridge into the cartridge holder. Lower the
cartridge lock lever until you hear a click to lock the cartridge in place.
The white post (BJ cartridge guide) should be visible through the slot. The BJ cartridge tilts slightly to
the left in the loaded position.
7 Close the printer cover.
If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page.
The fax prints a test page every time you insert a BJ cartridge.
You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEM
SETTINGS, p. 8-5.
c
• Do not try to manually move or stop the cartridge holder.
• Do not touch the components shown below or any metal parts.
Circuit board Round shaft
Guide rail Ribbon cable
Testing the fax _________________________________
After you have assembled the fax, installed the BJ cartridge, and loaded the paper, you can make
sure the fax is printing properly by making several copies of a document (see p. 4-1).
If you have problems printing, see Chapter 9.