Sony FAX-B140 - Manual (Page 49)

5-7
SENDING DOCUMENTS
5
Sending a document using UCanTalk
(FAX-B140 only) _______________________________
To use this feature you must first register the voice tags for UCanTalk (see p. 2-13).
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see p. 5-1).
2 Press [UCanTalk]. Then speak the voice tag into the microphone.
The registered name will be displayed on the LCD.
CANON
3 With the party’s name you wish to dial displayed, press [Start/Copy] to start the document
transmission.
• If the AUTO VOICE DIAL setting is set to ON, the fax automatically starts the document
transmission (see p. 8-2).
• If the displayed party’s name is not what you are searching for, press [Stop] to cancel the procedure,
and re-start from step 2.
• If an error occurs every time you speak into the microphone, re-register the voice tag and try again
(see pp. 2-10 to 2-13).