Registering coded speed dialling numbers and names – Sony FAX-B140 User Manual
Page 34
2-12
1
Press [Function].
2
Use [3] or [4] to select TEL REGISTRATION.
▼
Press [Start/Copy].
1-TOUCH SPD DIAL
3
Use [3] or [4] to select CODED SPEED DIAL.
▼
Press [Start/Copy].
A01=
4
Use [3] or [4] to select the two-digit code under which you want to register the number.
If a number is already registered under this coded speed dialling code, the number is displayed on the
LCD.**
5
Enter the party’s number and name the same way you registered them for one-touch speed
dialling.
See steps 5 to 8, Registering one-touch speed dialling numbers and names, p. 2-10.
A03=
81 773 3173_
6
Register the party’s voice tag the same way you registered it for one-touch speed dialling
(see pp. 2-10, 2-13).
7
To assign additional coded speed dialling numbers, start from step 4.
To finish, press [Stop].
* FAX-B140 only.
** To delete the name and number registered under the coded speed dialling code, press [Clear] and
[Start/Copy] after you perform steps 1 to 4 above.
Use coded speed dialling to dial a fax number at the press of three buttons. A fax/telephone number
up to 50 digits can be registered under each two-digit speed dialling code (01-50) and you can
register up to 50 locations. You can also register the name of the party (up to 16 letters) and a voice
tag*; the name appears on the printout of the coded speed dialling list.
Registering coded speed
dialling numbers and names