Sony FAX-B140 - Manual (Page 47)

5-5
SENDING DOCUMENTS
5
Cancelling sending
1 Press [Stop].
n • When you cancel sending, you may need to press [Start/Copy] for a few seconds, then the fax
will feed out the document.
• The fax prints an ERROR TX REPORT (see p. 8-7).
Automatic dialling
Sending a document using one-touch speed
dialling or coded speed dialling numbers ______
To use this feature you must first register numbers for one-touch speed dialling (see pp. 2-10, 2-11)
or coded speed dialling (see p. 2-12).
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see p. 5-1).
2 Press the one-touch speed dialling button under which the number you wish to fax is
registered.
TEL= 905 795 1111
-or-
Press [Coded Dial/Directory] and enter the appropriate two-digit coded speed dialling code.
The registered name and number appear.
• If you make a mistake, press [Stop]. Then press the correct one-touch speed dialling button or press
[Coded Dial/Directory] and re-enter the code.
• If an error message appears on the LCD, correct the error and press [Stop]. If necessary, see Faxing
problems, p. 9-9.
TEL= 1 49 39 25 25
3 Press [Start/Copy].
The fax begins sending.