Sharp AR-C260 - Manual (Page 14)

1-4
PART NAMES AND FUNCTIONS
Exterior
Left tray (See page 5-5)
Finished sheets are deposited here.
Left side cover
Open this cover when a paper misfeed occurs in
the fusing unit or the transfer unit.
Reversing automatic document feeder * (See
page 4-2)
Main switch
Press to turn power on and off.
Front cover
Open to replace toner cartridge.
Operation panel
Center tray (See page 5-5)
Finished sheets are deposited here.
Document cover*
Place the original on the document glass and
close the document cover before copying starts.
Original holder
Keep originals here.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Stand/1 x 500 sheet paper drawer * (See page 2-
7)
Stand/3 x 500 sheet paper drawer * (See page 2-
7)
Duplex module/2 x 500 sheet paper drawer *
(See page 2-8)
Paper tray
Each tray can hold approximately 500 sheets of the
recommended paper for color (20 lbs. or 80 g/m
2 ),
or approximately 500 sheets of SHARP standard
paper (20 lbs. or 80 g/m
2 ).
Left side cover release
Push this release up to open the left side cover.
Duplex bypass/inverter unit * (See page 1-6)
* , , , , and are peripheral devices. For a description of these devices, see page 1-6.
Without the duplex
bypass/inverter unit
installed.
00-08.book 4 ページ ２００２年１１月８日 金曜日 午前９時３９分