Set-up 1 – Sharp AL-1670 User Manual
Page 13
Advertising
11
GETTING ST
AR
TED
SET-UP
1
Remove all pieces of tape, then open the document
feeder cover and remove the protective material.
2
Use a coin (or other suitable object) to remove the
screw.
Store the screw in the paper tray as described in step
6 because it must be used if the copier has to be
moved. (p. 60)
3
Install the TD cartridge.
●
For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7
of TD CARTRIDGE REPLACEMENT on pages 39 and 40.
4
Gently lift and pull out the paper tray until it stops.
5
Remove the pressure plate lock. Rotate the pressure
plate lock in the direction of the arrow to remove it while
pressing down the pressure plate of the paper tray.
Set-up
Advertising