Sharp AL-1670 User Manual
Page 33
31
SPECIAL FEA
TURES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
,
) keys and
zoom (
,
) keys to change the copy ratio in the
horizontal direction in a similar manner as for the vertical
direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
) key. The vertical and horizontal ratios will be alternately
displayed.
7
Ensure that copy paper of the desired size is installed in
the paper tray.
●
If you have placed the original in the document feeder tray, copy paper
of the appropriate paper size will be automatically selected depending
on the original size and copy ratios. If you have placed the original on
the original table, use the ORIGINAL SIZE ENTER (
) key to
select the original size. Copy paper will be automatically selected. If
desired, another paper tray can be selected by pressing the TRAY
SELECT (
) key.
8
Set the number of copies and press the START (
) key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
,
) key or a zoom (
,
) key. Then, perform step 3 and the succeeding
steps.
●
To cancel this function, press the XY-ZOOM (
) key
again.