Sharp AL-1670 User Manual
Page 28
26
MAKING COPIES
Copying in the sort mode
When copying in the sort mode, the original image will be stored in the copier
memory each time an original is scanned and copying will start after all
originals have been scanned.
1
Set the originals face up in the document feeder tray.
●
The original table cannot be used for sort copying.
2
Press the SORT/GROUP key to select the SORT mode.
3
Ensure that the desired copy paper size is selected.
4
Set the number of copies and press the START (
) key.
●
Copying will start after the originals have been scanned. Up to 30 sheets
of originals can be scanned. (If originals are fed continuously using the
stream feeding mode, up to approximately 60 sheets of 8-1/2" x 11"
originals can be scanned. However, when copying originals which
require more memory such as photographs, the number of originals
which can be scanned will be less.) When the memory becomes full of
scanned original image data, the ORIGINAL DATA indicator will
blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
Sort/group
SORT/GROUP