Sharp AL-1670 User Manual
Page 38
36
SPECIAL FEATURES
4
Select the desired pattern number using copy quantity
keys.
●
The selected number will blink in the copy quantity display. For layout
pattern numbers, see the previous page.
5
Press the START key.
●
The selected number will light up steadily.
6
Press the 2 IN 1 / 4 IN 1 key to complete the selection.
●
The copy ratio will be calculated automatically. If the calculated copy
ratio is less than 50%, part of original image may not be copied because
the smallest copy ratio is 50%.
7
Set the number of copies and press the START (
) key.
●
Copying will start after the originals have been scanned. Up to 30 sheets
of originals can be scanned. (If originals are fed continuously using the
stream feeding mode, up to approximately 60 sheets of 8-1/2" x 11"
originals can be scanned. However, when copying originals which
require more memory such as photographs, the number of originals
which can be scanned is less.) When the memory becomes full of
scanned original image data, the ORIGINAL DATA indicator will
blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START
key. To cancel copying, press the CLEAR or CLEAR ALL key.
2 in 1 or 4 in 1
2 IN 1 OR 4 IN 1