Toner save mode – Sharp AL-1670 User Manual
Page 31
29
MAKING COPIES
Toner save mode
TONER SAVE MODE
This mode reduces toner consumption by approximately 10% in the automatic
and manual exposure modes. Copies will be lighter but still adequate for
general use. Selection of this mode does not affect the PHOTO (
) mode.
Follow the procedure below for setting the toning level.
1
Press the AUTO/MANUAL/PHOTO (
/
/
) key
to select the MANUAL (
) mode.
2
Press and hold down the AUTO/MANUAL/PHOTO (
/
/
) key for approximately 5 seconds.
●
The MANUAL (
) indicator will go out and the PHOTO (
)
indicator will begin to blink.
●
The exposure indicator marked “5” will light up, indicating that the
standard toner mode is active.
3
To enter the toner save mode, press the light (
) key.
●
The exposure indicator marked “1” will light up, indicating that the
toner save mode is selected.
4
Press the AUTO/MANUAL/PHOTO (
/
/
) key.
●
The PHOTO (
) indicator will stop blinking and will light up
steadily. The toner save mode is now active.
●
To return to the standard mode, repeat the procedure but use the dark
(
) key to select exposure level “5” in step 3.