Sharp UX-CD600 - Manual (Page 109)

107
7. Special Functions
7. Special Functions
Caller ID and Call Waiting ID (Requires
Subscription to Service)
Caller ID:
If you subscribe to a Caller ID service from your telephone company, you can
have caller information appear in the display of the machine and the cordless
handset when you receive a call.
Call Waiting ID:
If you subscribe to a Call Waiting ID service from your telephone company,
you can have caller information appear in the cordless handset display when
a call comes in while you are already using the phone line. (Note: For Call
Waiting ID, the caller information will only appear in the cordless handset
display; it will not appear in the machine display.)
Important:
To use these functions, you must subscribe to the corresponding services
from your telephone company. Note that the machine may not be compatible
with some services.
Turning on the Caller ID / Call Waiting ID function
To have Caller ID and/or Call Waiting ID information appear in the display, turn
on the Caller ID function as explained below.
♦
If you have connected two lines, Caller ID must be turned on separately for
each line that has Caller ID and/or Call Waiting ID service.
♦
Do not turn on Caller ID for a line if you do not have Caller ID or Call
Waiting ID service on that line.
1
Press once and once on
the machine.
2
Press once.
3
To turn on Caller ID for line 1, press
6 times. To turn on Caller ID for
line 2, press 7 times.
FUNCTION
Display:
OPTION SETTING
CALLER-ID (L1)
CALLER-ID (L2)
or
all.book 107 ページ ２００４年６月２２日 火曜日 午後１２時１分