Sharp UX-CD600 - Manual (Page 73)

Optional Answering System Settings
71
3. Ans
w
er
ing
System
1
Press once and once.
2
Press once and 4 times.
3
Press once.
4
Press to select YES (turn on
automatic fax reception), or to
select NO.
5
Press to return to the date and time display.
FUNCTION
STOP
♦
Automatic fax reception NO: The machine will answer after 20 rings, after
which it will wait to receive a remote command. Most callers will hang up
before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see
Remote Operations on page 76).
The initial setting is NO . If you want to change the setting to YES, press the
panel keys as follows:
The display briefly shows
your selection, then:
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message
(this applies to all boxes). The machine will receive faxes sent by auto dialing.
(Note: If the machine initially answers a call in Auto Attendant mode and then
switches to OGM only mode (TAD mode) because nobody answers the paged
device, fax reception will not be possible.)
1
Press once and once.
2
Press once and 3 times.
FUNCTION
Display:
T.A.D. SETTING
ON TAD FAILURE
ON TAD FAILURE
1=YES, 2=NO
OGM ONLY MODE
Display:
T.A.D. SETTING
OGM ONLY MODE
all.book 71 ページ ２００４年６月２２日 火曜日 午後１２時１分