Sharp UX-CD600 - Manual (Page 88)

Sending a Fax by Normal Dialing
86
1
Load the document(s).
•
READY TO SEND will appear in the
display.
•
If desired, press to set the
resolution and/or contrast.
2
Pick up the handset or press .
3
If the display at right appears, press
to select line 1 or to select
line 2.
(If the display at right does not appear,
go directly to Step 4.)
4
Listen for the dial tone and then press
the number keys to dial the number of
the receiving machine.
RESOLUTION/
RECEPTION MODE
SPEAKER
or
Sending a Fax by Normal Dialing
With Normal Dialing, you pick up the handset (or press ) and dial by
pressing the number keys.
♦
If a person answers, you can talk with them before sending the fax.
♦
Normal Dialing allows you to listen to the line and make sure the other fax
machine is responding.
SPEAKER
DELETE REPEAT SKIP
SPEAKER
WHICH LINE?
PRESS 1 OR 2
The above display will appear
if the dialing line setting is set
to MANUAL (page 36) and the
line 2 invalid setting is set to
NO (page 37).
all.book 86 ページ ２００４年６月２２日 火曜日 午後１２時１分