Recording a new outgoing message, Turning the transfer function on or off, Changing the transfer telephone number – Sharp UX-CD600 User Manual
Page 82
Remote Operations
80
Recording a new outgoing message
Note: You can only record a new outgoing message for the box you accessed
at the beginning of the call.
1
Press
and
on the telephone.
2
When you hear a short beep, speak into the telephone to record the new
message.
•
The message can be up to 15 seconds long. After 15 seconds (or earlier if
the machine detects silence after you finish speaking), you will hear a
beep, and the new message will be played back.
4
Turning the Transfer function on or off
To turn Transfer on: Press
,
, and
on the telephone, followed
by the number of the box for which you want the Transfer function to operate
(press
for the general box) and
.
To turn Transfer off: Press
,
, and
on the telephone.
9
1
9
2
Changing the transfer telephone number
1
Press , ,
and
on
the
telephone.
2
After you hear a short beep, enter the new telephone number. When
finished, press
.
•
To insert a pause between any two digits of the number, press
.
9
all.book 80 ページ ２００４年６月２２日 火曜日 午後１２時１分