Sharp UX-CD600 - Manual (Page 92)

Sending a Fax by Automatic Dialing
90
Editing and clearing auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
Press once and once.
2
Press or until the number you wish to edit or clear appears in
the display.
3
Press once.
4
Press for EDIT or for CLEAR.
•
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
•
Press or to move the cursor to the digit or digits you wish to
change, and then enter the new digit. The new digit will replace the old
digit.
•
If you do not wish to change the number, go directly to Step 6.
6
Press .
7
Make the desired changes to the name.
•
Press or to move the cursor to the letter or letters you wish to
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 89). The new letter will replace
the old letter.
•
If you do not wish to change the name, go directly to Step 8.
FUNCTION
START/MEMORY
Display:
<NEW NUMBER>
1234567890
1=EDIT, 2=CLEAR Example
all.book 90 ページ ２００４年６月２２日 火曜日 午後１２時１分