Subaru 2001 Outback - Manual (Page 196)

5-20
Audio
if you press
“FM”, “AM” or “SAT” button,
the player will enter standby mode. Press
the
“CD/AUX” button to start playback.
! Loading all the magazine (full disc
loading mode)
1. If you continue to press the
“LOAD”
button for more than 1.5 seconds, the
player will produce beep sound and will
enter the full disc loading mode.
2. When the disc number indicator
flashes and
“ALL LOAD” indicator illumi-
nates, insert a disc within 15 seconds. If a
disc is successfully loaded during this
period, the disc number indicator will stop
blinking and will steadily light.
3. When the loading of a disc is com-
plete, the next idle disc number indicator
will blink. Then repeat step 2.
4. When the magazine is filled with discs
by repeating steps 2 and 3, the player will
start playback of the discs, beginning with
the one inserted first.
If you fail to insert any disc during each 15
seconds interval, the full disc loading
mode will be canceled, and the player will
start playback of the disc inserted first.
& How to play back a CD
NOTE
For type A audio, if a disc that the
player cannot read has been loaded,
the player will display the message
“CHECK DISC”.
! When there is no CD inserted
Insert a CD by referring to
“How to insert a
CD (type A) ” F5-18 / “How to insert a CD
(s) (type B) ” F5-18.
When a CD is loaded, the player will start
playback of the CD, beginning with the
first track.
! When CD is in the player (type A)/
When playing back all CDs in the
player (type B)
When the “CD/AUX” button is pressed, the
player will start playback.