Subaru 2001 Outback - Manual (Page 207)

These buttons are located on the spokes
of the steering wheel. They allow the
driver to control audio functions without
taking his/her hands off the steering
wheel.
& MODE button
This button is used to select the desired
audio mode. Each time it is pressed, the
mode changes to the next one in the
following sequence.
*1: The frequency last received in the selected
waveband will be displayed.
*2: Only when a CD is in the player.
*3: Only when an auxiliary audio product is
connected.
*4: Only when an iPod is connected using the
iPod adapter that is available as a dealer
option.
& “ ” and “ ” switch
! With radio mode selected
Press the switch to the
“ ” or “ ” side
briefly to skip to a preset channel. Press
the switch to the
“ ” or “ ” side for more
than 0.5 second to seek the next recei-
vable station and stop at it.
That station
’s frequency will be indicated
on the audio display.
! With CD mode selected
Press the switch to the
“ ” side to skip
forward in the track/file (track) order. Press
the switch to the “ ” side to skip back-
ward in the track/file (track) order.
The track/file (track) number will be shown
on the audio display.
! With SAT mode selected
Press the switch to the
“ ” side to skip
forward in the channel order. Press the
switch to the
“ ” side to skip backward in
the channel order. When the switch is
briefly pressed, the channel will skip every
1 channel. When the switch is pressed for
more than 0.5 second, the channel will
skip every 10 channels. The channel will
be shown on the audio display.
& Volume control switch
Press the switch to the “+” side to increase
the volume. Press the switch to the “−”
Audio
5-31
– CONTINUED –