Checking the clutch pedal free play, Replacement of brake pad and lining, Breaking-in of new brake pads and linings – Subaru 2001 Outback User Manual

Page 370

Advertising
background image

11-34

Maintenance and service

& Checking the clutch pedal

free play

1)

0.19

– 0.44 in (5 – 11 mm)

Lightly press the clutch pedal down with
your finger until you feel resistance, and
check the free play.
If the free play is not within proper
specification, contact your SUBARU deal-
er.

Replacement of brake pad
and lining

CAUTION

If you continue to drive despite the
scraping noise from the audible
brake pad wear indicator, it will
result in the need for costly brake
rotor repair or replacement.

The right front disc brake and the right rear
disc brake have audible wear indicators
on the brake pads. If the brake pads wear
close to their service limit, the wear
indicator makes a very audible scraping
noise when the brake pedal is applied.

If you hear this scraping noise each time

you apply the brake pedal, have the brake
pads serviced by your SUBARU dealer as
soon as possible.

& Breaking-in of new brake

pads and linings

When replacing the brake pad or lining,
use only genuine SUBARU parts. After
replacement, the new parts must be
broken in as follows:

! Brake pad and lining
While maintaining a speed of 30 to 40
mph (50 to 65 km/h), step on the brake
pedal lightly. Repeat this five or more
times.
! Parking brake lining
The break-in maintenance for the parking
brake linings should be performed at a
SUBARU dealer.

Advertising
This manual is related to the following products: