Rear window wiper blade assembly (outback) – Subaru 2001 Outback User Manual

Page 381

Advertising
background image

1)

Metal spines

2. If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubber and
install them in the new blade rubber.

3. Align the claws of the support with the

grooves in the rubber and slide the blade
rubber assembly into the support until it
locks.

1)

Claw

2)

Stopper

4. Be sure to position the claws at the
end of the support between the stoppers
on the rubber as shown. If the rubber is
not retained properly, the wiper blade may
scratch the windshield.

& Rear window wiper blade

assembly (Outback)

1. Raise the wiper arm off the rear
window.

2. Turn the wiper blade assembly coun-
terclockwise.

Maintenance and service

11-45

– CONTINUED –

Advertising
This manual is related to the following products: