Settings and adjustments (continued) – Sharp LC-M3700 User Manual
Page 53
US
52
Advanced: Color Temp (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
High, Mid-High, Mid, Mid-Low, Low
Default
Mid
Upward
Entire image bluish tone (color temperature increases)
Downward
Entire image reddish tone (color temperature decreases)
Advanced: Black (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
Off, High, Low
Default
Low
Off
No Adjustment
High
For high detail in black portions
Low
For low detail in black portions
Advanced: 3D-Y/C (Video)
Adjustable range
Standard, Fast, Slow
Default
Standard
Standard
Normal adjustment [Sets characteristics for 3-dimensional Y/C separation to
standard setting.]
Fast
For movie image [Sets characteristics for 3-dimensional Y/C separation to settings
appropriate for movies.]
Slow
For still image [Sets characteristics for 3-dimensional Y/C separation to settings
appropriate for still pictures.]
Note:
Effective only when displaying video source with color system NTSC 3.58
Advanced: Monochrome (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
On/Off
Default
Off
On
Displays video in monochrome. (“Tint” cannot be adjusted. The setting automatically
set to “Off” if “Color” is adjusted.)
Off
Normal color
Advanced: Film mode (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
On/Off
Default
On
On
Automatically detects that the source signal is a video image at 24 frames/sec (DVDs
containing films etc.), and displays signal with high picture quality.
Off
Does not automatically detect sources at 24 frames/sec.
Note:
Effective only for interlaced video (480i/576i/1080i)
Advanced: I/P Setting (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
Interlace/Progressive
Default
Progressive
Interlace
Displays interlaced signal with 2-dimensional interpolation
Progressive
Displays interlaced signal with 3-dimensional interpolation
Note:
Effective only for Video, S-video and COMPONENT 480i/576i image
Red (PC (analog)/INPUT3(RGB))
Adjustable range
–30 - +30
Default
0
+ direction
Brightens red component
– direction
Darkens red component
Settings and Adjustments (Continued)