Sharp LC-M3700 - Manual (Page 8)

7
US
Introduction
ENLARGEMENT FUNCTION
•
Allows output of enlarged images for 4- or 9-screen (“2
×2” or “3×3”) setups, without using
a special-purpose external device.
CHAIN CONNECTION OF MULTIPLE MONITORS
•
Enables chain connection of monitors using video signal output (composite-video/D-Sub)
terminals.
•
Enables individual control via PC of multiple sets connected in a daisy chain using RS-
232C cables.
EXTERNAL CONTROL AND STATUS MONITORING FROM
A PC
•
The monitor can be controlled in various ways from a PC.
•
Multiple monitors can be individually controlled by connecting them in a daisy chain.
EXTERNAL SPEAKERS CAN BE CONNECTED
•
Compatible speakers: L/R, 8 ohm, 10W or larger
EQUIPPED WITH BUILT-IN MONITOR SPEAKER (MONO)
•
When activated from the menu screen, you can check the audio input status using the
built-in monitor speaker (mono).
CONTROL LOCK FUNCTIONS
•
The monitor is equipped with various operation lock functions to prevent unintended
operation or mischief. (The PIN can be set by the user.)
Numbers within refer to the main page(s) where the topic is explained.
56
20
22
37
37
18
57
54
61
37
58
Features (Continued)
Fluorescent Tubes
■ The fluorescent tubes in this product have a limited lifetime.
» If the screen gets dark, flashes, or does not turn on, change the fluorescent tubes with new
exclusive ones.
Expected lifetime: ............... 60,000 hours for LC-M3700 (horizontal mount)*
40,000 hours for LC-M3710 (vertical mount)*
*When “Brightness” is set to a center value.
» For more information, please contact your product dealer.
■ Because of the property of fluorescent tubes, the screen may flash during the initial period of use. If
this happens, please turn off the main power switch on the back of the monitor and turn on again to
confirm operation.