Sony NSR-1100 - Manual (Page 14)

NSR-1000 Series v1.1.1 Release Note
・ "Smooth Scaling" function is available for only one monitor frame which is
currently selected. This function is not applied to second display. (VT1:2069)
・ The DIRECT PTZ function is not supported on camera servers SNT-EX/EP
series connected to analog cameras. To achieve this function, use the buttons in
the Camera Control pane or the remote controller. (V11N:401)
３-７ Main Window - Play back control
・ The VMF detection frame is shifted from its expected position, if the VMF
package which was used during recording does not exist in playing back the
recorded image. (V11R:712)
・ If a number of alarms occur continuously, multiple alarms look like combined
on the timeline. Although user may not know switching alarms even if user
clicks next/previous alarm button, user can make sure that switching by
displayed time on the monitor frame. (VT1:1865)
３-８ Alarm Notification / Alarm History
・ Alarm information during log off is not listed in the “Alarm History Pane”. To
confirm such information, press Open Log Window on the Main screen and
select Event/Alarm from the Log Type.(VT1:1897)
・ When the SNT-V704 detects the sensor alarm, the number of channels
registered to the NSR-1000 Series are listed in the alarm history at the bottom
of the main GUI. (VT1:1707)
３-９ Search Window
・ Up to 100 records which are searched in the search window can be deleted with
selecting them at the same moment. Although user can select up to 1000
records, it is recommended to select less than 100 records for stability behavior
of the NSR-1000 Series. (VT1:1844)
- 10 -