User configuration, Layout configuration, Log window – Sony NSR-1100 User Manual

Page 20: Export, 3rd vendor camera, Vendor camera

Advertising
background image

NSR-1000 Series v1.1.1 Release Note

between start and stop time of recording is too long or the time displayed on the
monitor frame jumps suddenly. Please change the system time after stopping to
record. (VT1:1659)

-13 User Configuration

If user set the username and password except English one byte characters, [-],
and [_], user cannot log on with the username and the password. In this case,
please log on with administrative privileges and change the username and the
password. (VT1:1693)

-14 Layout Configuration

In the Layout Configuration, the “Deinterlace” setting should be ON (checked)
as the default in version 1.0.4. If user update from previous software version to
this, "Deinterlace" is not automatically ON. In this case, please make a check in
the "Deinterlace" box on the Layout Configuration with confirming setting of
the layout which has already been created. (VT1:2096)

-15 Log Window

N/A

-16 Export

User can select records up to 100 to export at the same time. (VT1:1845)

-17 3

rd

Vendor Camera

When you want to use the mask function for the AXIS camera/video server,
configure masks on the camera/video server side, not on the recorder side.
(VT1:2132, VT3:950, 926)

When the PTZ operation is carried out for a AXIS PTZ camera where the
VMD(Recorder) is configured, motion is detected even during PTZ operation of
the camera itself. (VT3:940)

- 16 -

Advertising
This manual is related to the following products: