Main window – monitoring – Sony NSR-1100 User Manual

Page 24

Advertising
background image

NSR-1000 Series v1.1.1 Release Note

for continuous recording, it takes more than ten minutes to load the recorded
data since [PLAYBACK] is pressed. When you want to select “iSCSI” as
recording storage, it is recommended to segment the record by setting a
recording schedule that inserts a 1 -second recording break each day in the
recurrent schedule of the normal recording. (V11N:38)

e.g.) Start time: 00:00:00 End time: 23:59:59

--4 Main Window – Monitoring

There is a problem that FPS value decreases slightly each time recording
starts/stops. This happens when a different video setting is made for the
monitoring setting and scheduled recording setting. (V11R:625)

When focus or bright adjustment is carried out during recording, frame loss
may occur. (V11N:489)

If the hotspot and a Monitor Frame during PLAYBACK exist in one layout,
when the Monitor Frame is selected, audio cannot be output. Please do
PLAYBACK after selecting and activating the monitor frames other than the
hot spot when it is an active monitor frame. (VT1:2247)

The value of Focus, Brightness and Day/Night in [Adjust] tab at [Camera
Control] pane are not updated when these values are changed from other
clients or browser. (VT2:750)

While executing the VMD (Recorder) motion detection function, there are cases
where any one of the four sides of a rectangular motion detection frame is not
displayed when it overlaps with a moving object. This issue happens when the
image size is set to more than 1280x960. (V11N:44)

Even if you select [MANUAL ACTION] in the Device menu, the manual action
list is not displayed on the NSR screen. To display the list, put the RM-NS1000
into the mouse mode, and select [Manual Action] in the Manual Action pane at
the top right of the screen of NSR. (V11N:207)

- 20 -

Advertising
This manual is related to the following products: