Sony NSR-1100 - Manual (Page 43)

NSR-1000 Series v1.1.1 Release Note
・ GUI abends at login when logoff while the alarm history panel is folded at main
monitoring window. (VT1:2188)
・ Play back audio is not available under the following conditions. (VT1:1906)
・ The layout is changed to 1x1 with the monitor frame double-clicked during
playing back. Please click ‘PLAYBACK’ button to restart after clicking
‘LIVE’ button once.
・ If user clicks ‘LIVE’ button during playing back at 1x1 layout, the
NSR-1000 Series cannot make a sound. Please start to monitor live image
except 1x1 and change layout to 1x1.
・ The problem that video and audio are momentarily interrupted just when the
layout of monitor frame is switched to 1x1 view by double-clicking on the
monitor frame. (VT1:2085, VT2:737)
・ The problem that camera video loss intermittently occurs when the live images
are monitored with an AXIS camera of which codec is MPEG-4 at 1 fps.
(VT1:2225)
５-２-２-４ Device Configuration
・ When the video-related settings (Image size, Image Quality for JPEG, Bitrate
for MPEG and Frame rate) differ between “Monitoring” and “Schedule
recording”/“Event/alarm recording” on the [Video] tab of the Device
Configuration screen, the settings under “Monitoring” are enabled for recording.
(VT1:2046,2101)
・ When canceling the VMD(Camera) setting, the previous setting is not saved
properly and the Main GUI might be closed down without expectation. When
VMD(Camera) is set, it is recommended to save the setting once without
canceling and change it again. (VT1:1564)
・ When creating and saving the name of a Camera Preset in configuration
- 39 -