Quick start, Setup and projection, Place the projector facing a screen – Sharp DT-400 User Manual
Page 14: Remove the lens cap and turn the projector on
-14
Quick Start
3
ON button
8
STNADBY button
4
INPUT button
6
ZOOM/FOCUS button
6
Adjustment buttons ('/"/\/|)
6
HEIGHT ADJUST button
8
STNADBY button
3
ON button
7
KEYSTONE button
6, 7
Adjustment buttons
('/"/\/|)
6
ZOOM/FOCUS button
4
INPUT buttons,
DIGITAL INPUT button
Page 16
1.
Place the projector facing a screen
Pages 21-27
Page 27
On the remote control
On the projector
This section shows the basic operation. For details, see the page described below for each step.
Setup and Projection
Connection of the projector and the video equipment with an S-video terminal is explained as an
example below.
2.
Connect the projector to the video equipment and plug the
power cord into the AC socket of the projector
3.
Remove the lens cap and turn the projector on
Connect the audio output terminal of the video equipment to the audio input
terminal of the audio equipment using an audio cable.
DT400_E_P06_15.p65
04.10.18, 1:14 PM
14