Sharp DT-400 - Manual (Page 21)

-21
Connections
Connecting to Video Equipment
Before connecting, ensure to unplug the power cord of the projector from the AC outlet and
turn off the devices to be connected. After making all connections, turn on the projector and
then the other devices.
Ensure to read the operation manuals of the devices to be connected before making connections.
When connecting the component video equipment to the component input terminal on the
projector (INPUT 1 or INPUT 2)
Component cable
(commercially available)
INPUT 1 or INPUT 2 terminal
Analog component
output terminal
DVD Player,etc.
1
2
DT400_E_P19_26.p65 04.10.18, 1:17 PM 21