Sharp DT-400 - Manual (Page 35)

-35
Basic Operation
480 I
480P
576 I
576P
NTSC
PAL
SECAM
540P
1080 I
720P
VGA
SVGA
XGA
Input signal
SIDE BAR SMART STRETCH
Output screen image
STRETCH CINEMA ZOOM
4:3 aspect ratio
Letterbox
16:9 aspect ratio
16:9 aspect ratio
Squeeze
16:9 aspect ratio
4:3 aspect ratio
Note
• “SMART STRETCH” cannot be selected while the Keystone correction (page 32) is being adjusted.
• Keystone correction (page 32) is disabled while the picture mode is set to “SMART STRETCH”.
• 580
I /580P is displayed on the screen when signal 576 I /576P is input.
• “STRETCH” is fixed when 540P, 720P or 1080 I signal is entered.
• “SMART STRETCH” cannot be selected while input signal from a computer (VGA, SVGA or XGA) is
entered.
DT400_E_P27_35.p65 04.10.18, 1:18 PM 35