Sharp DT-400 - Manual (Page 16)

-16
Setting Up the Projector
Position the projector perpendicular to the screen to achieve an optimal image.
Note
• The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights
when setting up the projector in a sunny or bright room.
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according to the desired picture size. (See
page 17.)
Setting Up the Projector
Indication of the Projection Image Size and Projection Distance
See “Screen Size and Projection Distance” on page 17 for details.
Example : When using a wide screen (16:9)
200"
150"
100"
80"
60"
Projection
Distance
Center
Picture Size
174" Ч
98"
131" Ч 74"
87" Ч 49"
70" Ч 39"
52" Ч 29"
17' 4" – 26' 0"
(5.29m – 7.95m)
12' 11" – 19' 6"
(3.95m – 5.95m)
8' 7" – 12' 11"
(2.62m – 3.95m)
6' 9" – 10' 4"
(2.08m – 3.15m)
5' 1" – 7' 8"
(1.55m – 2.35m)
DT400_E_P16_18.p65 04.10.18, 1:16 PM 16