Sharp DT-400 - Manual (Page 22)

-22
When connecting the video equipment with RGB output terminal (INPUT 5)
• Before connecting the cable, switch the digital input type switch to “VIDEO”.
INPUT 5 terminal
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
RGB output terminal
RGB cable
(commercially available)
DVD Player,etc.
4
3
2
Switch to “VIDEO”
1
Connecting to Video Equipment
Note
• For this connection, select “RGB” for “Signal Type” on the OSD menu or press on the remote control.
(See page 48.)
When connecting the component video equipment to the DVI input terminal on the projector (INPUT 5)
• Before connecting the cable, switch the digital input type switch to “VIDEO”.
Note
• For this connection, select “Component” for “Signal Type” on the OSD menu or press on the remote
control. (See page 48.)
INPUT 5 terminal
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
3 RCA to 15-pin D-sub cable
(sold separately: AN-C3CP)
Analog component
output terminal DVD Player,etc.
4
3
2
Switch to “VIDEO”
1
DT400_E_P19_26.p65 04.10.18, 1:17 PM 22