Samsung Version 1.1 - Manual (Page 73)

73
Manual Configuration Mode
(1) Once you turn the power on and SNS-110 functions normally, the following message will appear,
and if you press any key, you will be able to set the values manually.
☞ Press any key at this stage.
The following message appears if you do not press Space Bar or Enter. This is to wait for the reception of
the IP Address, which is transmitted through network.
(6) freset : the SNS-110 settings are initiated for factory shipment
########################################################
# #
# SAMSUNG Electronics. Co., Ltd. #
# webTX(Internet Video Server):SNS-110 #
# Version1.1(2000~2001) All Rights Reserved. #
# #
########################################################
>Current status is Flash Memory Boot
>To change system parameter, press any key within 2 seconds ...
########################################################
# #
# SAMSUNG Electronics. Co., Ltd. #
# webTX(Internet Video Server):SNS-110 #
# Version1.1(2000~2001) All Rights Reserved. #
# #
########################################################
>Current status is Flash Memory Boot
>To change system parameter, press any key within 2 seconds
....IP:0.0.0.0, SM:0
.0.0.0, GW:0.0.0.0
>Web Transmitter Image Loading<
SNS-110> freset
Setting HTTP port to 80 and FTP port to 21.
>Application cookie field initialized.
Cookie App field initialized.
ftp server addr invalid.
For complete erase, use PRESET button.
End of WT_FTP_INIT
SNS-110>