Samsung Version 1.1 - Manual (Page 74)

(3) If you enter "p" at "Select items?", you can access the network information.
74
To go to the next level, go over to the number (1) after re-running SNS-110. When you successfully
entered Space Bar or Enter, the following screen appears.
(2) When the following message appears by running the above item, you can manually set the
information relating to Network.
>Ethernet(MAC) address in Cookie : [00-00-f0-ff-a1-ba]
>Forced to use DHCP for IP address setting(DHCP Flag=0x1)
>Stored IP address <00000000> is not valid!
>RARP(Fixed IP) Mode -> Try to find IP : Retry No.[1]
>Ethernet(MAC) address in RARP mode : [00-00-f0-ff-a1-ba]
.....
>DHCP(Dynamic IP) Mode -> Try to find IP : Retry No.[1]
.....
>RARP(Fixed IP) Mode -> Try to find IP : Retry No.[2]
>Ethernet(MAC) address in RARP mode : [00-00-f0-ff-a1-ba]
.....
>DHCP(Dynamic IP) Mode -> Try to find IP : Retry No.[2]
.....
--------------------------------------------
[WEB Transmitter(SNS-110) Version 1.1]
Boot command Loop menu
--------------------------------------------
[p] Print Boot Parameters
[c] Change Boot Parameters
[q] Quit Menu
-------------------------------------------
Select items? [ ]
Select items? [ ] p
----------- SNS-110 Parameters-------------
ip address: 0.0.0.0
Ethernet address: [00-00-f0-ff-a1-ba] (41402)
Subnet mask address: 0.0.0.0
SMTP Mail server: NULL
DNS Server address: 0.0.0.0
Gateway address: 0.0.0.0
Domain Name: NULL