Samsung Version 1.1 - Manual (Page 80)

Registering IP information with Administration server
Install HTTP server, which can process the Properties transmitted by SNS-110, or
receive separate service from the Service Provider to register IP information with
Administration server. Dynamically assigned IP information can only be set at SNS-110,
whether which name or server will be used. If you cannot access the browser, use the
console to set up.
Run the Boot Command Mode as explained in Appendix C, "Manual Configuration
Mode," and select "Change boot parameters" menu.
80
##########################################################
#
#
# SAMSUNG Electronics. Co., Ltd. #
# webTX(Internet Video Server):SNS-110 #
# Version1.1(2000~2001) All Rights Reserved. #
# #
##########################################################
>Current status is Flash Memory Boot
>To change system parameter, press any key within 2 seconds ..
--------------------------------------------
[WEB Transmitter(SNS-110) Version 1.1]
Boot command Loop menu
--------------------------------------------
[p] Print Boot Parameters
[c] Change Boot Parameters
[q] Quit Menu
-------------------------------------------
Select items? [ ] c
[ WEB Transmitter ( SNS-110 ) Version 1.1 ]
Boot parameters modification menu
--------------------------------------------
[i]. Ip address modify
[s]. Subnet mask address modify
[m]. SMTP mail server address modify
[d]. DNS server address modify
[g]. Gateway address modify
[n]. Domain name modify
[1]. IP auto-regist server address
[2]. IP auto-regist cgi format
[3]. IP auto-regist enable/disable
[4]. IP notify-mail enable/disable
[5]. IP notify-mail address
[c]. dhcp flag modify
[q]. Quit menu
--------------------------------------------
Select items? [ ]