Sanyo PLC-WU3800 - Manual (Page 27)

7
Basic Operation
black out→ normal → black out → normal →• • • •
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. The screen changes each time
you press the NO SHOW button as follows.
NO SHOW button
Press the P-TIMER button on the remote control. The P-Timer
display 00:00 appears on the screen and the countdown starts
( 00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 34, 41 for
details.
IMAGE button
No show disappears after 4 seconds.
P-Timer display
P
Note:
See the previous page for the description of
other buttons.
IMAGE button
NO SHOW button
P-TIMER button
SCREEN button
Select the screen size (See pages 36-37, 44 for details).
SCREEN button