Sanyo PLC-WU3800 - Manual (Page 29)

9
Computer Input
Choose Computer  by pressing the INPUT button on the top control or press the COMPUTER 2 button on the
remote control.
Input Source Selection (Computer : RGB)
Direct Operation
Menu Operation
P
Note:
When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.46).
1

3
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Computer  and
then press the SELECT button.
When Computer  is selected, analog RGB input
source will be selected directly.
Input Menu
Top Control
INPUT button
Computer 1
HDMI
Computer ⁄
S-video
COMPUTER  button
Remote Control
Computer  (RGB) ⁄
Video
⁄ COMPUTER  can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.