Sanyo PLC-WU3800 - Manual (Page 36)

36
Computer Input
Store
This projector has the picture screen resize function, which
enables you to customize the image size.
Screen Menu
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original
image size is larger than the screen size (1280 x 800), the
projector enters to the panning mode automatically. Use the
Point ▲▼◄► buttons to pan the image. When adjusted, the
arrows will turn red. When reached to the correction limits,
the arrows will disappear.
Full
Provide the full screen image.
P
Note:
• The Screen Menu, except for Normal and Custom, cannot be operated when 70p, 1035i or 1080i is
selected in the PC System Menu (p.30).
• This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is
higher than it, reset the resolution to the lower before connecting to the projector.
• The image data in other than 1280 x 800 is modified to fit the screen size in initial mode.
• True, Full and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC
System Menu (p.30).
1

To store the adjusted data, select Store and press the Point
► or the SELECT button. Use the Point ▲▼ buttons to select
one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1–4) in the
Image Mode Selection on page 34.
A confirmation box appears and
then select yes.
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Screen and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item and
then press the SELECT button .